Ricoh 3224C All in One Printer User Manual


 
Troubleshooting
124
6
Changing the Paper Size
Preparation
Be sure to select the paper size
with User Tools and the paper size
selector. If you do not, misfeeds
might occur. See p.56 Tray Paper
Size: (Tray 1-4).
Important
If you wish to change the paper
size set in the LCT(optional), con-
tact your service representative.
Note
Procedures for changing the paper
size differ depending on the tray
(paper tray 1, paper tray 2 or the
optional paper tray units). Make
sure you are following the appro-
priate procedure before you begin.
Reference
For details about paper sizes and
types, see p.165 Copy Paper.
Changing the Paper Size of
Tray 1 and 2
A
AA
A
Make sure the paper tray is not in
use. Then, pull out the paper tray
slowly until it stops.
B
BB
B
Lower the base panel by pushing
"Push". When paper is set in the
tray, push down on the paper.
C
CC
C
If paper is loaded in the tray, re-
move it.
D
DD
D
Set the paper guide lock to the
unlocked" position.
E
EE
E
While pressing the release lever,
adjust the side guides to the paper
size.
ZGJS120E
ZGJS130E
ZJKY280J
ZGJS210E
ThemisC1_AE_zentai_pre_FM.book Page 124 Thursday, July 28, 2005 2:13 PM