Filter
Top Products
NovaJet PRO 600e User's Guide
2-16 Getting Started
➪➪
➪➪
➪ To clear cartridge recognition error
1 Press Access Cartridges to move the carriage to the position which allows replace-
ment of the ink cartridges.
2 Verify that four ENCAD NovaJet PRO 600e cartridges are installed. Replace any
invalid cartridges.
3 Press OK. If the problem has been corrected, the printer will proceed with the print
request. If the problem remains, the printer will beep.
Pausing the printer
To pause the printer while printing, press the Pause button. Press it again to resume printing.
Canceling a print
To cancel a print, first send a cancel order from the computer using the appropriate command for
your software application. For example, you can delete the file in the Print Manager/Print Options.
To clear the buffer after cancelling a print, press Reset on the Main menu.
About print drivers
! Caution: Wider prints (60" vs 42" vs 24") and 600DPI prints require substantial file
sizes. You may experience printer slowing or stalling when using the Windows driver to
print from an application, or when printing a file using the ENCAD Macintosh EPU. The
number of print passes specified will significantly impact the data transfer requirements.
Less passes require more data; consequently, there is a higher probability of stalling when
using less passes (faster printing modes). To do independent RIPing and printing, or
faster simultaneous RIPing and printing, you may want to consider a stand-alone software
or hardware RIP product. A list of RIP products that supports the NovaJet PRO 600e can
be found at www.encad.com.