Subaru Robin Power Products PRO 600E Printer User Manual


 
Printer Options 3-5
NovaJet PRO 600e User's Guide
PRINTER OPTIONS
To change the number of passes
1 Choose Setup/Print Mode/Print Passes.
2 Choose Single, Three, Four, Six, Eight or Ten Pass.
3 Press OK.
Print direction
Print direction specifies whether the inkjets fire on both passes of the carriage over the print area
(bidirectional), or just on the return pass (unidirectional). If you’re printing an image with heavy
fill or shading, unidirectional can reduce running and ink bleeding. If you’re more concerned with
printer speed, bidirectional firing can decrease your printing time.
To change the print direction
1 Press Setup/Print Mode/Print Direction.
2 Choose Unidirectional or Bidirectional.
3 Press OK.
Choosing paper options
Paper options let you define the following:
Supply Type* Media Standard
Margins Auto-Load Delay
Auto-Cut Save Media
Auto-Wipe
*Media feeding and loading is covered in Chapter 2.
Media standard
When you create an image, you determine its size at the computer. It's important that you know
the size of the image and load the appropriate size media because the printer automatically
defines the print area based on the loaded media's width. Be sure that the media you load is wide
enough to accommodate the image. If extra length is required, use roll media. If the media is
smaller than the image, the image may be truncated. Minimum media width is 11".
To choose the media standard
1 Press Setup/Paper Option/Media Standard
2 Choose the size of media you are loading.
3 Press OK.