Subaru Robin Power Products PRO 600E Printer User Manual


 
Printer Options 3-9
NovaJet PRO 600e User's Guide
PRINTER OPTIONS
To set margins
1 Press Setup/Paper Option/Margins.
2 Choose Normal or Expanded.
3 Press OK.
Auto-Load Delay
Auto-Load Delay lets you set the time between when the printer senses the media and when
printing starts. This lets you manually reposition the media if necessary. The default is 6
seconds, selectable from a range of 1-12 seconds.
To set auto-load delay
1 Press Setup/Paper Option/Auto-Load Delay.
2 Choose the delay time.
3 Press OK.
Auto-Cut
When the Auto-Cut option is set to on, the printer automatically cuts the media when the image
is complete. Be sure the image is dry before cutting, turn on the dryer and/or specify a Dry
Time. See “Setting a Dry Time” in this chapter for the procedure. You can select Cut from the
control panel at any time to cut the media.
Note: Automatic cutting is disabled when the paper feed option is set to TAKEUP.
To set auto-cut
1 Press Setup/Paper Option/Auto-Cut.
2 Choose On or Off.
3 Press OK.
Save Media
When the Save Media is On (the default), the media advances only as far as needed to print the
image. With the Save Media option turned off, the printer advances the full print area of the
loaded media. For example, if a 36 inch roll is loaded, the printer advances the length of the
print area for a standard 36 x 48" sheet even if the printed image is only 30 inches long.