Filter
Top Products
18
audiochan # (default is 2 )
Since there are three analog outs, if analog is selected you must also use the "audiochan"
cmd:
• audiochan 2 -- output 1 (this is not a typo)
• audiochan 1 -- output 2
• audiochan 0 -- output 3
volume # (default is 100 )
Sets the volume to a value between 0 and 100. For example: volume 100
videomode <mode> (default is 1024x768x60p )
Set the output framebuffer format. The options are:
VGA:
• 1024x768x60p
• 640x480x60p – HD600 only
• 800x600x60p – HD600 only
Component:
• 720x480x60p
• 720x576x50p – HD2000 only
• 1280x720x60p
• 1280x720x50p – HD2000 only
• 1920x1080x60i – HD2000 only
Composite:
• NTSC – HD600 only
• PAL – HD600 only
imagemode # (default is 0 )
• imagemode 0 – Display the image centered without scaling (may result in
cropping if the image is larger than the current videomode resolution).
• imagemode 1 - Scaled to fit. The whole image is displayed as large as possible
with correct aspect ratio.
• imagemode 2 - Scaled to fill. Image is scaled to fill screen whilst maintaining
aspect ratio
• imagemode 3 - Scaled to fill without maintaining aspect ratio
slideinterval # (default is 3 )
Sets the number of seconds between slides. Must be an integer. For example:
slideinterval 3