Filter
Top Products
40
TRAINING MODE
The optional Training Mode is designed to help you become better acquainted with the register mode and offers an
ideal place for "beginners" and new employees to practice transaction examples. Once the Training Mode is
activated, there is no access to any operations in the "PRG", "X", or "Z" modes. Also note, the transaction numbers
do not count up in the Register Mode until you exit the Training Mode. The Training Mode can be activated at any
time since it does not record any activity in the machine totals.
TO TURN ON THE TRAINING MODE
"PRG" + (666666) + [AMOUNT TEND/TOTAL]
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z manager password has been programmed, TYPE the (PASSWORD #), then PRESS the
[CLERK] key, or if you did not program a PRG/Z manager password, go to Step 3.
3. ENTER (666666), then PRESS the [AMOUNT TEND/TOTAL] key.
4. Turn the key to the "REG" (REGISTER) position to resume normal register operations.
NOTE: The Training Mode indicator light (a small decimal point) will be displayed in the first digit of the display.
TO SHUT OFF THE TRAINING MODE
"PRG" + (555555) + [AMOUNT TEND/TOTAL]
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z manager password has been programmed, TYPE the (PASSWORD #), then PRESS the
[CLERK] key, or if you did not program a PRG/Z manager password, go to Step 3.
3. ENTER (555555), then PRESS the [AMOUNT TEND/TOTAL] key.
4. Turn the key to the position desired.