Filter
Top Products
Technical Specifications
3.4 Copper Ethernet Port Specifications
The RSG2288 can be ordered with two-port 10/100/1000Tx modules in slots 1, 2,
3, and 4, and a one-port 10/100/1000Tx module in 5. All copper ports have the
following specifications:
Parameter Specification Notes
Speed 10/100/1000 Mbps Auto-negotiating
Duplex FDX / HDX Auto-negotiating
Cable-Type > Category 5 Shielded/Unshielded
Wiring Standard TIA/EIA T568A/B Auto-Crossover, Auto-Polarity
Max Distance 100m
Connector RJ45
Isolation 1.5kV RMS 1-minute
3.5 Fiber Ethernet Optic Specifications
The following sections detail fiber optical specifications on ports that can be
ordered with a RSG2200 series Ethernet switch. The user determines the type of
optics at time of ordering, and can determine the modules installed on a
particular unit by reading the factory data file via the ROS® user interface.
Sections 3.5.1 and 3.5.2 list the specifications of the optical transceivers used in
the fiber Ethernet mod
ules available for the RSG2288. The specifications are
organized by signaling speed and then by order code. Module order codes are
contained within each product when assembled and configured at the factory.
Consult the RuggedCom ROS User Guide for help in obtaining the factory
configuration data.
3.5.1 Fast Ethernet (100Mbps) Optical Specifications
Order
Code
Mode
Connector
Type
Cable Type
(um)
Tx λ (typ.)
(nm)
Tx min
(dBm)
Tx max
(dBm)
Rx
Sensitivity
(dBm)
Rx
Saturation
(dBm)
Distance
(typ.)
(km)
Power
Budget
(dB)
62.5/125 -19 12
FXA01 MM ST
50/125
1300
-22.5
-14 -31 -14 2
8.5
62.5/125 -19 12
FXA02 MM SC
50/125
1300
-22.5
-14 -31 -14 2
8.5
FXA11 MM LC 9/125 1300 -19 -14 -32 -14 2 13
62.5/125 -19 12
FXA03 MM MTRJ
50/125
1300
-22.5
-14 -31 -14 2
8.5
FXA04 SM ST 9/125 1310 -15 -8 -32 -3 20 17
FXA05 SM SC 9/125 1310 -15 -8 -31 -7 20 16
FXA06 SM LC 9/125 1310 -15 -8 -34 -7 20 19
FXA07 SM SC 9/125 1310 -5 0 -34 -3 50 29
FXA08 SM LC 9/125 1310 -5 0 -35 -3 50 30
37
RuggedCom
®
RuggedSwitch
®
RSG2288 Installation Guide rev103