Filter
Top Products
LTR BOX mode
The image in the Letterbox mode will be zoomed in,
and the top and bottom portion ‘blanked off.’ This ratio
is best suited for LaserDisc movies or non-anamorphic
DVD’s.
ANAMPHC mode
The image is compressed vertically, but anamorphic
software will appear properly proportioned. This is
best suited for use with 16:9 DVD’s.
STD 4:3 mode
The input signal will be scaled to fit in the center of the
16:9 screen.
VIRTUALWIDE mode
This aspect ratio is designed to fill the 16:9 screen
with a 4:3 image. The center of the picture is not
stretched, and it gradually stretches on the sides
reaching the most extreme stretch at the far edges of
the picture. (non-linear scaling) In addition, we apply
a very slight vertical stretch uniformly (no graduation)
which results in a very small amount of cropping
of the top and bottom of the image area. Thus a 4:3
image is transformed into a 16:9 image with minimal
distortion.
16
ASPECT RATIO CONTROLS
» Aspect Ratio Operations (Manual)
There are four aspect ratios available that can be selected for video signal inputs.
When viewing videos or DVDs:
1. Press the ASPECT button on the remote control.
2. Within 3 seconds...
Press the ASPECT button again. The screen size switches as follows:
LTR BOX STD (4:3) ANAMPHC VRTWIDE
Active
Image
Area
Active Image Area
Active Image Area
Active
Image
Area