Filter
Top Products
Checking the signal being transmitted to RGB1 terminal
Use this to confirm the signal being transmitted to the RGB1 terminal. It is set to RGB and can not be adjusted.
Setting a computer image to the correct RGB select screen
With the computer image, select the RGB Select mode for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the “RGB TYPE” mode to “AUTO”
Press the MENU button on the remote control to display the MAIN MENU on the screen, then...
1. Use the
and buttons to select “INSTALL 1”, then press the MENU button. The “INSTALL 1” menu
appears.
2. Use the and buttons to select “RGB TYPE”.
3. To set the RGB select mode to “AUTO”...
Use the and buttons to select “AUTO”. The mode switches as follows each time the or button is
pressed:
AUTO STILL MOTION RESIZE1 RESIZE2 DTV
4. Once the setting is completed...
Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.
34
OSD (On Screen Display) Controls
OSD
BNC INPUT : COMP
D-SUB TYPE : RGB
RGB TYPE : AUTO
HD TYPE : 1080B
INPUT SKIP : OFF
FACTORY : OFF
NEXT PAGE
INSTALL 1
SEL. ADJ. RETURN
EXIT
OSD
BNC INPUT : COMP
D-SUB TYPE : RGB
RGB TYPE : AUTO
HD TYPE : 1080B
INPUT SKIP : OFF
FACTORY : OFF
NEXT PAGE
INSTALL 1
SEL. ADJ. RETURN
EXIT