Runco CW-42i Computer Monitor User Manual


 
19
OSD (On Screen Display) Controls
Main Menu Sub Menu Functions Default Reset
PICTURE
ADJUST
CONTRAST Adjusts the contrast. Center Yes
BRIGHTNESS Adjusts the brightness. Center Yes
SHARPNESS Adjusts the sharpness Center Yes
COLOR Adjusts the color. Center Yes
TINT Adjusts the tint. Center Yes
PICTURE MEM Sets the image memory according to the VIDEO environment and image S/W.
CONTRAST
Yes
VIDEO NR Reduces noise visible in image. OFF Yes
KELVIN
Adjusts the color temperature and white balance. 8500K Yes
WHITE
BALANCE
RED GAIN
Adjusts the red content (signal level). Center Yes
GREEN GAIN
Adjusts the green content (signal level). Center Yes
BLUE GAIN
Adjusts the blue content (signal level). Center Yes
RED OFFSET
Adjusts the red content (black level). Center Yes
GREEN OFFSET
Adjusts the green content (black level). Center Yes
BLUE OFFSET
Adjusts the blue content (black level). Center Yes
RESET
Resets the WHITE BALANCE settings to the factory default values. OFF Yes
GAMMA Adjusts the brightness of midtone areas. 2.2 Yes
DITHER Enables high-quality dark area reproduction. AUTO Yes
COLOR CHART
RED Adjusts hue and color density of red. Center Yes
GREEN Adjusts hue and color density of green. Center Yes
BLUE Adjusts hue and color density of blue. Center Yes
YELLOW Adjusts hue and color density of yellow. Center Yes
MAGENTA
Adjusts hue and color density of magenta. Center Yes
CYAN
Adjusts hue and color density of cyan. Center Yes
RESET Resets COLOR CHART settings to the factory default values. OFF Yes
Main Menu Sub Menu Functions Default Reset
AUDIO
BASS Sets the bass. Center Yes
TREBLE Sets the treble. Center Yes
BALANCE Sets the left/right balance. Center Yes
AUDIO INPUT 1-3
Sets the allocation of the audio connectors. *1 Yes
Main Menu Sub Menu Functions Default Reset
IMAGE
OPTIONS
ASPECT RATIO Selects between the different aspect ratio modes.
-- --
V SHIFT
Adjusts the vertical position. Center Yes
H SHIFT Adjusts the horizontal position. Center Yes
V-SIZE
Adjusts the vertical size. Min Yes
H-SIZE Adjusts the horizontal size. Min Yes
COMPUTER Turn this on to have the monitor automatically adjust “FINE PICTURE” and
“PICTURE ADJ”
OFF * No
FINE PICTURE Adjusts for flickering on the computer image. Min *2 Yes
PICTURE ADJ
Adjusts for striped patterns on the computer image. Center *2 Yes
Main Menu Sub Menu Functions Defaults Reset
INSTALL 1
OSD
DISPLAY OSD
When set to OFF, the on-screen menu is not displayed. ON Yes
OSD ADJ.
Sets the position of the menu. 1 Yes
OSD POSITION Sets the display format as a horizontal or vertical screen. H Yes
OSD ORBITER
Sets the OSD not to be displayed at the same position. OFF Yes
BNC INPUT Sets the BNC connectors. RGB Yes
D-SUB TYPE
Checks the signal being transmitted to RGB1 terminal. RGB --
RGB TYPE
Sets the appropriate mode for the computer image. AUTO Yes