Filter
Top Products
Main Menu Sub Menu Functions Default Reset
RGB (VGA signals), VIDEO (Moving picture), WIDE (Wide VGA), DTV.
HD TYPE Sets the digital broadcasting (1080A, 1080B, 1080C) or the High Vision (1035I).
1080B No
INPUT SKIP
Skips over signals which are not present. OFF Yes
FACTORY Resets all the settings (PICTURE ADJ, AUDIO, IMAGE OPT, INSTALL 1-3,
etc.) to the factory default values.
-- --
Main Menu Sub Menu Functions Default Reset
INSTALL 2
AUTO OFF Sets the monitor for use as an energy-saving display when used with a computer.
OFF Yes
CINEMA MODE
Sets the picture to suit the movie. ON Yes
PDP PROTECT
LUM. SETTING Limits screen brightness to reduce burn-in on the display. AUTO Yes
ORBITER Moves the picture intermittently. OFF Yes
INVERSE Displays a negative/positive inverse image or an all-white screen. OFF Yes
IMAGE SWEEP Sweeps the screen with a white vertical bar. OFF Yes
SOFTEN Softens the detail in 4 steps (1-4) OFF Yes
SIDEBAR ADJ
In case of 4:3, sets the luminance of both sides. 3 Yes
S1/S2 Resizes the S-video image to best fit the display. OFF Yes
Main Menu Sub Menu Functions Defaults Reset
INSTALL 3
TIMER
PRESENT TIME
Sets the day of the week and the time. -- No
PROGRAM Sets the ON/OFF time for switching on the power and the input mode. OFF Yes
INPUT SELECT
Sets the input mode at the time the power is switched on. LAST Yes
CONTROL LOCK
Disables the function of the front panel buttons. OFF Yes
IR ENABLE Disables the transmission of the remote control. ON Yes
LOOP OUT
When set to ON, the received signal will be looped out. OFF Yes
OSD (On Screen Display) Controls
20
Main Menu Sub Menu Functions Default Reset
ID NUMBER Sets ID number for the display. ALL Yes
VIDEO WALL
DIVIDER Creates a 2x2 or 3x3 video wall. OFF Yes
POSITION Sets the position. -- --
DISP. MODE
Selects the screen mode from between Splitting and Blanking. SPLIT Yes
AUTO ID
Automatically sets the ID number of multiple displays. OFF Yes
IMAGE OPT Adjusts the position of the image, etc. -- --
P. ON DELAY
When set to ON, each display turns on after a delay time. OFF Yes
LUM SET
LINK
Sets a uniform brightness for each display. OFF Yes
REPEAT
-
TIMER
Sets two programmable timers. OFF Yes
Main Menu Sub Menu Functions Default Reset
LANGUAGE
Sets the language of the menus (English, German, French, Italian, Spanish). English No
COLOR
SYSTEM
Sets the VIDEO format (AUTO, PAL, PAL-M, PAL-N, PAL60, SECAM, 4.43
NTSC or 3.59 NTSC).
AUTO No
SIGNAL INFO.
Used to check the frequency and synchronizing polarities of the active signal
being input.
-- --
*1 AUDIO INPUT 1: VIDEO 1 AUDIO INPUT 2: HD/DVD1 AUDIO INPUT 3: RGB1
*2 RGB/PC only