Filter
Top Products
DIVIDER
Set the 2x2 or 3x3 video wall.
Example: Setting “4”
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select “DIVIDER”.
4. Use the and buttons to select “4”.
The mode switches as follows each time the or button is pressed:
OFF 1 4 9
POSITION
Set the position of each display.
Example: Setting “4”
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select “POSITION”, then press the MENU button. The “VIDEO WALL POSITION”
screen appears.
4. Use the and buttons to select “NO. 4”.
The mode switches as follows each time the or button is pressed:
• 4 Screens
NO. 1 NO. 2 NO. 3 NO. 4
• 9 Screens
NO. 7 NO. 8 ....... NO. 14 NO. 15
5. Press the EXIT button to return to the VIDEO WALL screen.
53
OSD (On Screen Display) Controls
DIVIDER : OFF
POSITION
DISP. MODE : SPLIT
AUTO ID
IMAGE OPT
P.
ON DELAY : OFF
LUM SET LINK : OFF
REPEAT TIME : OFF
VIDEO WALL
SEL. ADJ. RETURN
EXIT
Information
■ DIVIDER settings
OFF, 1 ......... 1 Screen (Matrix display function does not work)
4 .................. 4 Screens (2x2 video wall)
9 .................. 9 Screens (3x3 video wall)
* When you select “4” or “9”, set the VIDEO WALL POSITION.
POSITION NO. : 4
VIDEO WALL POSITION
SEL. ADJ. RETURN
EXIT
Information
■ VIDEO WALL POSITION settings
1 Screen ..... There is no need to set POSITION.
4 Screens
9 Screens
NO. 1 NO. 2
NO. 4 NO. 3
NO. 7 NO. 8 NO. 9
NO. 10 NO. 11 NO. 12
NO. 13 NO. 14 NO. 15