Filter
Top Products
39
OSD (On Screen Display) Controls
POWER / STANDBY indicator
AUTO
OFF
mode
POWER /
STANDBY
indicator
AUTO OFF
operating
status
Description Turning the picture
back on
On Green Not
activated.
Horizontal and
vertical synchronizing
signals are present
from the computer.
Picture already on.
Off
Red Activated. Horizontal and/or
vertical synchronizing
signals are not sent
from the computer.
Operate the keyboard
or mouse. The
picture reappears.
Setting the picture to suit the movie
The film image is automatically discriminated and projected in an image mode suited to the picture. [NTSC, PAL, PAL60, 480I (60Hz),
525I (60Hz), 576I (50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the “CINEMA MODE” to “OFF”
Perform the following operations.
Press the MENU button on the remote control to display the MAIN MENU on the screen, then...
1. Use the and buttons to select “INSTALL 2”, then press the MENU button. The “INSTALL 2” menu appears.
2. Use the and buttons to select “CINEMA MODE”.
3. To set the CINEMA MODE to “OFF”...
Use the and buttons to select “OFF”. The mode switches as follows each time the or button is pressed:
ON OFF
4. Once the setting is completed ...
Press the EXIT button to return to the main menu. To delete the
main menu, press the EXIT button once more.
Information
■ CINEMA MODE
ON ......... Automatic discrimination of the image and projection
in cinema mode.
OFF ....... Cinema mode does not function.
■ Restoring the factory default settings
Select “FACTORY” under the INSTALL 1 menu.
Note that this also restores other settings to the factory defaults.
AUTO OFF : OFFf
CINEMA MODE : ON
PDP PROTECT : OFF
SIDEBAR ADJ : 3
S1 / S2 : OFF
AUTO SIZE : ON
DVI TYPE
INSTALL 2 2 / 3
SEL. ADJ. RETURN
EXIT
PREVIOUS PG
NEXT PAGE