Filter
Top Products
3-9
OPERATION
= Red
= Green
= Blue
= Red and Green
= Green and Blue
= Red and Blue
= All colors
NOTE: Once is pressed (with no OSD present), the projector will not respond to non-
numeric entry until 2 digits have been entered or until 5 seconds of inactivity have elapsed.
Use of the key within the menu system is noted with the appropriate topic elsewhere in
Section 3. For example, press in the Channel Setup menu to enable deletion or copying of
a channel.
OSD (On-screen display)
Press and hold for approximately 1 second to toggle menus on or off (i.e., visible or
invisible). Or press followed immediately by to guarantee the correct toggle
direction (useful if you are unsure of the present status). Note that invisible menus are fully
functional.
NOTES: 1) With OSD on, you can still mute menus, error messages, slidebars, etc. with the
appropriate setting in the Preferences menu. 2) The status of the key is displayed in the
LCD window on the rear panel of the projector.
Help
Press for detailed information about any current menu and highlight. Press again to
exit. Press to access the General Help menu consisting of Using Help, Projector Setup,
Keypad, Channel Selection and Status LEDs. Press to leave General Help.
Test
Press to display one of the available test patterns. Press again to display the next
available pattern in the sequence. will exit after the last pattern, or press at any time
to remove the current test pattern from the screen and return to the current external source.
NOTE: For a complete list of all test patterns, see the Advanced menu description later in
Section 3.
Keypad operating settings (protocols)
The remote keypad and the optional wired keypad both store keypad operating settings (called
protocols) in memory. In some advanced applications, such as when you want to use two sepa-
rate keypads to control two projectors independently, you may want to override the original
protocol set at manufacture (which is "A or B") for one of the keypads. See section 2.10,
Keypad Protocols and Conversion for complete instructions.
Func
61
Func
62
Func
63
Func
64
Func
65
Func
66
Func
67
Func
Func
Func
OSD*
OSD*
OSD*
OFF
ON
or
OSD*
Help
Help
Help
Help
Exit
Test
Test
Test
Test
Exit