Filter
Top Products
4-6
MAINTENANCE
IF ZOOM LENS: Access to the 3 lens mount
screws is likely blocked by the toothed zoom
ring in front of it. First rotate the zoom ring by
hand until its 3 access holes align with the
screws, then insert the hex socket ball driver
through the holes to loosen the screws-do not
remove. See Figure 4.11.
STEP 3 Rotate the lens barrel slightly
Using both hands, rotate the lens barrel coun-
terclockwise until the screw heads align with the
larger end of their slots on the lens. See Figure
4.12.
Figure 4.11. Align zoom gear ring to
access 3 screws
-ZOOM LENS-
Figure 4.12. Rotate slightly