Filter
Top Products
5-2
SPECIFICATIONS
Analog RGB and YPbPr (INTERLACED OR PROGRESSIVE SCAN FORMAT)
Horizontal frequency range 15 - 120 kHz *
Vertical frequency range ** 24 -120 Hz
Pixel clock rate 10 - 160 MHz
Signal format Analog RGB or YPbPr
Input levels
R,B,G,Y - with sync 1.0Vp-p ±2 dB
R,G,B - without sync 0.7Vp-p ±2 dB
Pb,Pr 0.7Vp-p ±2 dB
DC offset ± 5V
Nominal impedance 75 ohms
Maximum return loss (VSWR) 1.2:1 dB @ 200 MHz
* Display quality may be limited by pixel sampling rate when at the higher end of the frequency range.
** Maximum vertical output rate = 72 Hz. H and V frequencies of the input source and of the DMDs may not be the same.
Analog Video (optional)
Signal formats Composite, S-Video (Y/C)
Video standards NTSC, NTSC 4.43, PAL, PAL-M,
PAL-N, PAL-60 & SECAM
Input level, Composite 1.0 Vp-p ± 3db (including sync tip)
Input level, S-Video, Luma (Y) 1.0 Vp-p ± 3db (including sync tip)
Input level, S-Video, Chroma (C) 630 mVp-p nominal (burst)
DC offset ± 5V
Nominal impedance 75 ohms
Maximum return loss (VSWR) 1.2:1 dB @ 6 mHz
Sync (INTERLACED OR PROGRESSIVE SCAN FORMAT)
Input levels 0.5Vp-p - 5.0Vp-p
Impedance (for composite or separate H & V) 75 ohms
Sync type · Separate H and V
· Bi-level or tri-level sync-on-green
· Bi-level or tri-level composite
Polarity Positive or negative
Duty cycles 0.10% - 20% vertical3% - 20% horizontal
Maximum return loss (VSWR) 1.2:1 dB @ 200 MHz
Audio
Number & type of inputs 4 pairs of phono plug
Nominal input and output level 1.0 Vp-p
DC offset ± 2V
Impedance 30k ohms ± 10k ohm
Volume control range -60 dB to +20 dB
Bandwidth (± 3 dB) 30 Hz to 20 kHz
RS-232 Serial Input
Number of connectors 3 (1 network in, 1 network out, 1 for
switcher control)
Connector type 9 pin D
RS-422 Serial Input
Number of connectors 2
Connector type 6-pin XLR