Filter
Top Products
M
AINTAINING
Y
OUR
P
RINTER
6.17
6
7
Take a new imaging unit out of its package. Hold it by its
handle.
8
Remove the paper covering the imaging unit by removing
the tape under the handle of the imaging unit.
C
AUTIONS
:
• Don’t use sharp objects, such as a knife or scissors, to open the
imaging unit package and tape on the protective paper liner. You
could damage the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for
more than a few minutes. Cover it with black paper, if necessary.
• Close the top and left covers should the insallation needs to be
halted for any reason.
• Do not touch the surface of the green roller on the imaging unit,
or print quality problems can occur.
9
Locate the imaging unit slots inside the printer, one on
each side
.