Filter
Top Products
S
ETUP
G
UIDE
22
Installing Printer Software in Windows
Verify the following before you install the printer software:
N
OTES
:
• For Windows NT 4.0/2000/XP/2003, the system administrator
should install the software.
• Windows 95 and Windows NT 4.0 are only supported on the CLP-510N.
C
AUTION
: For the CLP-510N, to print a document in Windows 95
or Windows NT 4.0, you must install SyncThru and then add a
network printer port. For details about installing SyncThru and
adding a port, please refer to Network Management Software
Quick Guide and SyncThru User’s Guide.
All applications should be closed on your PC before beginning
installation.
1
Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM drive does not automatically run:
Select
Run
from the
Start
menu, and type
x:\setup.exe
in the Open box (where
x
is the drive letter for the CD-ROM
drive), then click
OK
.
N
OTE
: If the
New Hardware Found
window appears during the
installation procedure, click in the upper right corner of the box
to close the window, or click
Cancel
.
Item Requirements
Operating system
Windows 95/98/Me/NT 4.0/2000/XP/
2003
RAM
95/98/Me 32 MB
NT 4.0/2000 64 MB
XP 128 MB
2003 256 MB
Free disk space
95/98/Me/NT 4.0/
2000/XP/2003
300 MB
Internet Explorer 5.0 or higher