Filter
Top Products
U
SING
P
RINT
M
ATERIALS
3.12
Using the Manual Feed
If you select
Manual
in the
Source
option when changing print
settings, you can manually load a sheet of print material in the
Multi-purpose Tray. Manually loading paper can be helpful when
you want to check the print quality after each page is printed.
This loading procedure is almost the same as the procedure for
loading in the Multi-purpose Tray, except you load paper
sheet-by-sheet in the tray, send print data to print the first page,
and press the
On Line/Continue
button ( ) on the control
panel to print each following page.
1
Load a sheet of print material
with the print side down
and against the right edge of the Multi-purpose Tray.
2
Squeeze the paper width guide and slide it to the right to
touch lightly against the edge of the paper without causing
it to bend.