Filter
Top Products
A.7
APPENDIX
Envelope construction is critical. Envelope fold lines can vary
considerably, not only between manufacturers, but also within
a box from the same manufacturer. Successful printing on
envelopes depends upon the quality of the envelopes. When
selecting envelopes, consider the following components:
• Weight: The weight of the envelope paper should not exceed
90 g/m
2
(24 lbs), otherwise, jamming may occur.
• Construction: Prior to printing, envelopes should lie flat with
less than 6 mm (0.25 in.) curl.
• Condition: Envelopes should not be wrinkled, nicked, or
otherwise damaged.
• Temperature: Use envelopes that are compatible with the
heat and pressure of the printer.
• Size: Use only envelopes within the following size ranges.
Minimum
Maximum
216 X 356 mm
(8.5 X 14 in.)
76 X 127 mm
(3 X 5 in.)
95 X 127mm
(3.8 X 5 in.)
Automatic input
tray
Manual input tray
Note: You may experience some paper jams when using any
media with a length of less than 127 mm (5 in.). This may be
caused by paper that has been affected by environmental
conditions. For optimum performance, insure you are storing and
handling the paper correctly. Please refer to “Printer and Paper
Storage Environment” on page A.6.
Envelopes
Paper Specifications