Filter
Top Products
A.21
APPENDIX
Using Printer in Linux
Changing Printer Connection Method
If you change the printer connection method from USB to
parallel or vice versa while in use, you must re-configure your
Samsung printer by adding the printer in your system. Take
the following steps:
1
Make sure that you connect the printer to your computer.
Turn both the computer and the printer on.
2
When the Administrator Login dialog box appears, type in
“root” in the Login field and enter the system password.
3
From the Startup Menu icon at the bottom of the screen,
select Samsung Printer and then Configuration Tool.
You can also access the Samsung Printer Configuration
dialog box by typing in “samsung-config” from the
Terminal screen.
4
When the Samsung Printer Configuration dialog box
appears, click the Add Printer icon on the toolbar at the
top of the dialog box.
5
Click the Connection tab at the top of the Add a Printer
dialog box.
Ensure that the printer port is set properly. If not proper,
change the device setting.
Note: You must log in as a super user (root) to install a new printer
to the printing system. If you are not, ask your system administrator.
6
Click OK.