Filter
Top Products
2.6
SETTING UP YOUR PRINTER
Connect to the Computer
with a Parallel Cable
1
Make sure both the printer and the computer are turned off.
2
Plug the parallel printer cable into the
connector on the back of the printer.
Push the metal clips down to fit inside
the notches on the cable plug.
3
Connect the other end of the cable to
the parallel interface port on your
computer, and tighten the screws.
See your computer documentation if
you need help.
To the parallel
port on PC
➜
If you are using a USB interface
Go to “Installing USB driver in Windows” on
page 2.13.
Note: To connect the printer to the parallel port of the computer requires a
certified parallel cable.
You will need to buy the IEEE1284 compliant cable.