Schneider Electric INTERBUS Basic Network Interface Module Computer Hardware User Manual


 
Application Example
42
890USE19600 April 2004
Sample Island Assembly
Introduction The configuration example(s) in this chapter use a particular Advantys STB island
assembly, described below. Your island assembly is independent of the network’s
master scanner because the island is represented by the NIM as a single node on
the fieldbus network.
Sample Island
Assembly
The sample I/O system used in this chapter’s application example(s) implements a
variety of analog and digital modules.
1 STB NIB 1010 INTERBUS NIM
2 STB PDT 3100 24 VDC PDM
3 STB DDI 3230 two-channel 24 VDC digital input module (2 bits of data, 2 bits of status)
4 STB DDO 3200 two-channel 24 VDC digital output module (2 bits of data, 2 bits of echo
output data, 2 bits of status)
5 STB DDI 3425 four-channel 24 VDC digital input module (4 bits of data, 4 bits of status)
6 STB DDO 3415 four-channel 24 VDC digital output module (4 bits of data, 4 bits of echo
output data, 4 bits of status)
7 STB DDI 3615 six-channel 24 VDC digital input module (6 bits of data, 6 bits of status)
8 STB DDO 3605 six-channel 24 VDC digital output module (6 bits of data, 6 bits of echo
output data, 6 bits of status)
9 STB AVI 1275 two-channel +/-10 VDC analog input module (16 bits of data [channel 1], 16
bits of data [channel 2], 8 bits of status [channel 1], 8 bits of status [channel 2])
10 STB AVO 1255 two-channel 0 ... 10 VDC analog output module (8 bits of status [channel
1], 8 bits of status [channel 2], 16 bits of data [channel 1], 16 bits of data [channel 2])
11 STB XMP 1100 termination plate