Filter
Top Products
12-2
Chapter 12: Parameters
12
12-2 Details of each of the parameters
(1) Enable/disable the use of the transmission buffer (Setting parameter address 37(8))
Select whether to enable/disable the buffer for each message by entering the appropriate value at
parameter address 37(8).
* 80 to 83(H) are the valid values for parameter address 37(8).
Relationship between messages and transaction codes.
(2) Token monitor time (parameter address 04(8))
Set the token monitor time as follows, based on the number of bytes being sent by this station.
- 0 to 5K bytes: 10 ms
- 5K to 10K bytes: 30 ms
- 10K bytes or more: 40 ms
Message
Selection of
transmission buffer
80(H) 81(H) 82(H) 83(H)
Message other than transmission
Transmission
message
Messages other than SHARP's proprietary
message format
SHARP's
proprietary format
Computer link function
Remote function
Message Transaction code (TCD)
Use selection of
transmission type buffer
80
(H)
81
(H)
82
(H)
83
(H)
Messages
other than
transmission
60000 to 65202 (request) X X X X
65203 to 65215 (response) X O X O
Transmission
messages
0to999 OOOO
1000 (request computer link function: SHARP's
proprietary function)
XXOO
1001 (request remote function: SHARP's proprietary
function)
XXOO
1002 to 1199 O O O O
1200 (response of computer link function: SHARP's
proprietary function)
OOOO
1201 (response of remote function: SHARP's
proprietary function)
XXOO
1202 to 59999 O O O O
*
(Transmission buffer... : Used, : Not used)
*
(Transmission buffer... : Used, : Not used)