Sharp AR_M280 Printer User Manual


 
6-8
KEY OPERATOR PROGRAMS
Energy save
Auto power shut-off timer
When a programmed length of time has elapsed
without any operation after printing is complete, the
printer enters the auto power shut-off mode to save
power consumption at the maximum. This function
lowers the user's electricity bill, reduces waste of
natural resources, and cuts down on environmental
pollution.
[When using the operation panel on the main unit:]
The time until auto power shut-off occurs can be set
to 15 minutes, 30 minutes, 60 minutes, 120 minutes
or 240 minutes.
[When using the operation panel with touch panel:]
The time until auto power shut-off occurs can be set
in 1 minute increments up to 240 minutes.
NOTES
We suggest you set the most appropriate time according
to your usage pattern.
If you use the program “Auto power shut-off” (described
below) to disable the auto power shut-off mode, the
time set with this program will be ignored.
Auto power shut-off
When a programmed length of time has elapsed
without any operation after printing is complete, the
printer enters the auto power shut-off mode to save
power consumption at the maximum. This program
is used to disable this function. If the auto power
shut-off mode is disabled, the auto power shut-off
time setting (described above) will be ignored. If you
wish to disable the auto power shut-off mode for some
reasons, use this program.
NOTE
Since we would like you to fully understand the purpose
of this mode, we suggest that you enable this mode and
set the most appropriate time using program "Auto power
shut-off timer".
Preheat mode
Preheat mode functions when a programmed length
of time has elapsed without any operation after
printing is complete. This function lowers the user's
electricity bill, reduces waste of natural resources,
and cuts down on environmental pollution.
We suggest you set the most appropriate time
according to your usage pattern.
The time until the printer enters the preheat mode
can be set in 1 minute increments up to 240 minutes.
Toner save {Toner save in printer mode}
The toner save print will reduce toner consumption.
If the toner save print is set, black solid areas will
be printed in a halftone.
Print data
Example of
print in the
toner save
mode
[When using the operation panel with touch panel:]
If you use the facsimile feature or copy feature, the
toner save mode can be set for each feature. Toner
consumption can be reduced by approximately 10%.