Filter
Top Products
1-7
1
PART NAMES AND FUNCTIONS
Interior
*2 For replacement and installation of each cartridge, see the separate manual “Supply Replacement Method.”
Duplex module side cover
Open when a misfeed has occurred in the duplex
module.
Side cover open knob
Push up to open the side cover when a misfeed has
occurred in the fusing unit.
Fusing unit
Image that has been transferred on paper is fixed by
heating it in the fusing unit.
CAUTION
The fusing unit is hot. Take care in removing misfed
paper.
Developer cartridge* (See page xxxx.)
Container that contains developer. The cartridge must
be removed and replaced with a new one at the time
of replacement.
Toner cartridge* (See page xxxx.)
Container that contains toner. When toner is
exhausted, the cartridge must be removed and
replaced with a new one.
Photoconductive drum
A photoconductor is applied to the surface of the
photoconductive drum. Images are formed on the
photoconductive drum.
NOTE
Do not touch or damage the photoconductive drum.
Cartridge lock lever
When replacing the drum, toner or developer cartridge,
turn down this lever and pull it out.