Sharp AR_M280 Printer User Manual


 
2-8
REMOTE OPERATION THROUGH NETWORK
Set up
Setting of restriction on access to Web pages and basic settings for using the network scanner and the status/alert
E-mail function are described below.
Network Card Setup
A link to the network card Web page for setting the print server card (network interface card) is provided.
Password Setup
A password for accessing the Web pages is set. Two types of password (user level and administrator level) are set.
Network Scanning Setup
Basic setting screen for network scanner. E-mail subject for scanner delivery, file name, etc. are set. To use the
network scanner, you must set up E-mail & DNS Setup. This screen displays the settings of E-mail & DNS Setup
and provides a link to the screen.
Status & Alert E-mail Setup
Basic setting screen for the status/alert E-mail system. Machine name, machine code, and machine installation
location are set. To use the network scanner, you must set up E-mail & DNS Setup. This screen displays the settings
of E-mail & DNS Setup and provides a link to the screen.
E-mail & DNS Setup
Basic setting screen for transmitting E-mail. E-mail server, system administrator address, DNS server, etc. are set.
Sender of E-mail Setup
Sender of E-mail transmission of the network scanner is set. This item will be set as the From item of E-mail
header. Up to eight senders can be registered and a sender can be selected among them from the operation panel.
Custom Directory Setup
Group index names in the list display on the operation panel are set.
Status Message Parameters Setup
Used when the current counter information of this machine such as print count, copy count, and total output is
delivered in accordance with the specified schedule.
Alerts Message Parameters Setup
Alert information is transmitted immediately to the specified addresses when a problem of supplies such as paper
and toner, failure, and an error such as a paper misfeed occur in this machine.