Filter
Top Products
Rev 3.0 B 2/29/08 7
Note: While this guide application note covers installing an RJ-11 IP
Gateway with a Raven X, the RJ-11 IP Gateway is also designed to
work with the Raven-E and any other Airlink modem with an Ethernet
connection, using the same configuration outlined here
Thesestepsarejustabasicconfigurationtogetyoustartedand
allowtheRavenXtoconnectwiththeHostRJ‐11IPGateway.
Refertotheuserguideformoreconfigurationoptionsfor
specificenvironments.
Note: Omit this section if you are
not connecting your Host RJ-11
IP Gateway to a Raven X.
Default settings
• ManagementInterfaceIPAddress:192.168.13.31.
• TelnetandWirelessAcepassword:12345
• DHCPserver:enabled.
• PublicMode‐theIPAddressassignedbythecarrieris
assignedtotheHostRJ‐11IPGateway.
If you are using the defaults for the Raven X and the RJ-11 IP Gate-
way, you can skip this section and connect your RJ-11 IP Gateway
directly to your Raven X.
Configuring the Raven X
1. ConnectyourRavenXdirectlytotheEthernetporton
yourcomputerand topower.
2. StartWirelessAce andconnecttoyourmodem.
Start>AllPrograms>AirLinkCommunications>Wireless
Ace3G>WirelessAce3G
a. ClickonConnect.
b. SelectUDP.
c. Typeinthemodem’slocalIP(defaultis192.168.13.31).
d. Typeinthemodem’spassword(default1234 5)