Sierra Wireless RJ-11 Network Card User Manual


 
Rev 3.0 B 2/29/08 17
Table 3-2: Status - Resetting the Configuration
Table 3-3: Status - Error Conditions
ETHERNET‐IndicatesthestatusoftheEthernet
connection(RJ45port).
Table 3-4: Ethernet
PHONE‐Indicatesthestatusofthephoneport(RJ11).
LED Condition Description
Alternating Green/
Red
While the Reset button is held in, the status
light will begin to blink in this sequence to
indicate the
Host RJ-11 IP Gateway will shortly
restore the factory default condition.
If you do not want to restore the factory
default, release the button before the
sequence changes to Green/Yellow.
Alternating Green/
Yellow
While the Reset button is held in, the status
light will begin to blink in this sequence to
indicate the factory default configuration was
restored. Once the
Host RJ-11 IP Gateway
indicates the configuration was restored, you
can release the reset button.
LED Condition Description
Alternating Green/Red A serious system error occurred. See the
system log for more details.
Alternating Green/
Yellow
The current configuration is corrupt and
the factory default configuration is being
used
Solid Red The Host RJ-11 IP Gateway has
encountered a fatal error, contact technical
support for assistance.
LED Condition Description
Solid Green The Ethernet link is available and
idle.
Green/Yellow
Blinking
Network traffic is detected.
Off The Ethernet link is unavailable.