Rev 3.0 B 2/29/08 43
Figure 2-18: Host RJ-11 IP Gateway: System Log
Port Status
ThecurrentstatusoftheRJ‐11portisdisplayed.
Figure 2-19: Host RJ-11 IP Gateway: Port Status
TheDCD,RTS,CTS,DTR,DSR,andRIcolumnsindicatethe
statusofthemodemsignalsfortheRJ‐11(phone)port.Ifthe
modemsignalispresent(eitherassertedifitisanoutgoing
signal,ordetectedifitisanincomingsignal)itsnamewill
appearinthecorresponding
column.
TheStatecolumnindicateswhethertheportisopen,closed,
waitingforDCD,orexperiencinganynotableconditions(such
asflowcontrol).TheSerialParameterscolumnindicatesthe
currentsettingsfortheport.
Note: The Serial Parameters column reflect the actual, real-time
serial settings in use by the port. The settings that are specified via
the serial configuration pages are applied each time the port is
opened. If the port is closed, the serial parameters reported by Port