Support User Manuals

Sierra Wireless RJ-11 Network Card User Manual

Open as PDF

of 60

Host RJ-11 IP Gateway

26 2120028

Figure 2-4: Host RJ-11 IP Gateway: Serial Settings

• Enablingflowcontrolenablesitonbothinputandoutput.

• Theinactivitytime‐outshutsdowntheserviceontheport

ifthereisnoinputoroutputinthe sp ecifiedtime‐out

period.

• WithModemSignalLoopbacks,theHostRJ‐11IP

Gatewayeliminatestheuseofspecializedcablesrequired

tochangesignaltypesanddirectionsbyperformingthe

loopbackofsignaltypestoothersignaltypesinternally.

• NativeCOM,(oranyRFC‐2217TelnetclientwithCOM‐

PORT‐OPTIONsupport)overridesthebaudrate,size,

parity,stopbitsandflowcontrolparameters.

Port Services

Bydefault,theRJ‐11portisconfiguredtoacceptincoming

TCPconnectionsfromTCP/telnetclientswithoutgoingservice

basedonphonenumbersdialedbytheattacheddevice

(ModemService).Youmayconfigurethe portstoinitiate

previous next