Support User Manuals

Sierra Wireless RJ-11 Network Card User Manual

Open as PDF

of 60

Rev 3.0 B 2/29/08 37

IfthedeviceserverisconfiguredtouseDHCP,itwilltrytoget

NTPserverinformationfromtheDHCPserver.Youmayalso

manuallysetuptheaddressesonthispage.TheNTPservice

usesUDPport123.Ifyourdeviceserverisbehindafirewall

youmayneedto

allowaccessestothisportthroughthe

firewall.AddingorchangingtheNTPserverwilltriggerthe

HostRJ‐11IPGatewaytogetthetimeagain.

TheHTTPserveryouspecifyneednotbeadesignatedtime

server–justareliableserver.Thedeviceserverderivesthe

systemtimefromtheHTTPheadertheserverreturns.Adding

anHTTPserverwillnotautomaticallytriggergettingthetime.

Youmustrebootforthistotakeeffect.

Security Settings

ThesecuritysettingspageincludessettingsfortheSystem

Passwordand NetworkIsolation.

previous next