A
UTHENTICATION
C
OMMANDS
4-115
- tx-period – Time a port waits during authentication
session before re-transmitting EAP packet
(page 4-113).
- supplicant-timeout – Supplicant timeout.
- server-timeout – Server timeout.
- reauth-max – Maximum number of reauthentication
attempts.
- max-req – Maximum number of times a port will
retransmit an EAP request/identity packet
to the client before it times out the
authentication session (page 4-109).
- Status – Authorization status (authorized or not).
- Operation Mode – Shows if single or multiple hosts (clients)
can connect to an 802.1X-authorized port.
- Max Count – The maximum number of hosts allowed to
access this port (page 4-110).
- Port-control – Shows the dot1x mode on a port as auto,
force-authorized, or force-unauthorized
(page 4-109).
- Supplicant – MAC address of authorized client.
- Current Identifier – The integer (0-255) used by the
Authenticator to identify the current
authentication session.
• Authenticator State Machine
- State – Current state (including initialize, disconnected,
connecting, authenticating, authenticated,
aborting, held, force_authorized,
force_unauthorized).
- Reauth Count– Number of times connecting state is re-entered.
• Backend State Machine
- State – Current state (including request, response,
success, fail, timeout, idle, initialize).
- Request Count – Number of EAP Request packets sent to the
Supplicant without receiving a response.
- Identifier(Server) – Identifier carried in the most recent EAP
Success, Failure or Request packet received
from the Authentication Server.