SMC Networks SMC6726AL2 Switch User Manual


 
C
ONFIGURING
THE
S
WITCH
3-32
Web – Click System, Line, Telnet. Specify the connection parameters for
Telnet access, then click Apply.
Figure 3-14 Enabling Telnet
CLI – Enter Line Configuration mode for a virtual terminal, then specify
the connection parameters as required. To display the current virtual
terminal settings, use the show line command from the Normal Exec
level.
Console(config)#line vty 4-15
Console(config-line)#login local 4-16
Console(config-line)#password 0 secret 4-17
Console(config-line)#timeout login response 300 4-18
Console(config-line)#exec-timeout 600 4-19
Console(config-line)#password-thresh 3 4-20
Console(config-line)#end
Console#show line 4-25
Console configuration:
Password threshold: 3 times
Interactive timeout: Disabled
Login timeout: Disabled
Silent time: Disabled
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
VTY configuration:
Password threshold: 3 times
Interactive timeout: 600 sec
Login timeout: 300 sec
Console#