Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-128
Example
Related Commands
map access-list ip (4-126)
MAC ACLs
access-list mac
This command adds a MAC access list and enters MAC ACL configuration
mode. Use the no form to remove the specified ACL.
Syntax
[no] access-list mac acl_name
acl_name – Name of the ACL. (Maximum length: 16 characters)
Console#show map access-list ip
Eth 1/25
access-list ip david cos 0
Console#
Table 4-36 MAC ACLs
Command Function Mode Page
access-list mac Creates a MAC ACL and enters
configuration mode
GC 4-128
permit, deny Filters packets matching a specified
source and destination address, packet
format, and Ethernet type
MAC-ACL 4-130
show mac
access-list
Displays the rules for configured MAC
ACLs
PE 4-131
mac access-group Adds a port to a MAC ACL IC 4-132
show mac
access-group
Shows port assignments for MAC ACLs PE 4-132
map access-list
mac
Sets the CoS value and corresponding
output queue for packets matching an
ACL rule
IC 4-133
show map
access-list mac
Shows CoS value mapped to an access
list for an interface
PE 4-134