Filter
Top Products
II-14
Setting DME Wipes
Chapter 2 Video Switching
The cropping process when the transition is executed is as
follows.
Cut: Cropping is maintained during transition
execution and then removed at the point in time
that the transition ends.
Last 5%: Cropping is maintained as is until the
transition progresses to 95% and then removed
during the remaining 5%.
Linear: Cropping is linearly removed from the start of
the transition in accordance with the progression
of the transition.
Adding an Edge to a DME Wipe
Pattern
With a DME wipe, you can add a border around the pattern
(border) and defocus the edge of an added border (soft
border).
The edge color and background color can also be adjusted.
For details on how to add an edge, see “Adding the Edge to the Wipe
Pattern” (page II-12).
Settings menu: [DME Wipe Edge], [DME Wipe Edge
Color] (page II-16)
Adjusting the Background Color of a
DME Wipe
You can adjust the background color of a DME wipe.
Settings menu: [DME Wipe Bkgd Color] (page II-16)
• The background color of the DME wipe can only be used
for Flip Tumble DME wipe patterns.
• The background color of the DME wipe is shared with
the edge color of the wipe pattern.
0
100 (%)
y
t
(%)
100
Cut
0
100 (%)95
y
t
(%)
100
95
Last 5%
0
100 (%)
Linear
y
t
(%)
100
t: Transition execution time
y: Amount of change of transition and crop
Transition
Crop
Transition
Crop
Transition
Crop
Tips