Filter
Top Products
II-29
Details on [Key] Menu
Chapter 2 Video Switching
[Key Wipe Modify] Menu
Display the [Key Wipe Modify] menu by pressing the V1 knob while [Key Wipe] (page II-24) is selected.
Menu item Description Knob Parameter Meaning Setting range Reference
page
Positioner Turn the positioner for adjusting the key
wipe position on/off.
If you also select [On] with the V3 knob,
the pattern will move from the location to
which the pattern was moved with the
positioner to the center of the screen as a
result of the transition.
Tip
The patterns for which the positioner can
be used are as follows.
17, 18, 21, 22, 23, and 24
V3 AutoCT Turns auto
center function
on/off
Off, On –
V4 Pos Turns positioner
on/off
Off, On
Positioner
Adjust
Adjust the key wipe position. If you want
to reset the setting value to “0.00,” press
the V4 knob.
Notes on setting values
Pos H: Negative values adjust the
position to the left, positive values to
the right.
Pos V: Negative values adjust the
position to the bottom, positive
values to the top.
V2 Pos H Adjusts position
in horizontal
direction
–200.00 to +200.00
(0.00)
–
V3 Pos V Adjusts position
in vertical
direction
–200.00 to +200.00
(0.00)
V4 Center Resets setting
value to “0”
–
Rotation Set the rotation method of a key wipe
pattern.
V4 Rotate Rotation type Off, Angle, Speed,
Mag (magnitude)
–
Rotation
Adjust
Set the parameters depending on the
rotation type selected in [Rotation].
• When [Angle] is selected: Set [Angle].
• When [Speed] is selected: Set [Speed].
• When [Mag] is selected: Set [Angle]
and [Mag].
About setting values
Angle: –100.00 corresponds to the state
in which the pattern is rotated once
counterclockwise, and +100.00 to
the state in which the pattern is
rotated once clockwise. 0.00
corresponds to a non-rotation state.
Mag: –200.00 rotates the pattern twice
counterclockwise, and +200.00
rotates the pattern twice clockwise.
0.00 does not rotate the pattern.
Speed: –100.00 is the speed of one
counterclockwise rotation per
second, and +100.00 is the speed of
one clockwise rotation per second.
0.00 corresponds to a stationary
state.
V2 Angle • Pattern
inclination
angle
([Angle])
• Pattern
inclination
angle when
transition
starts ([Mag])
–100.00 to +100.00
(0.00)
II-11
V3 Mag Amount of
rotation during
transition
–200.00 to +200.00
(0.00)
V4 Speed Pattern rotation
speed
–100.00 to +100.00
(0.00)