Filter
Top Products
II-51
Video Input Setup (Video (Input))
Chapter 8 Setup ([Setup] Menu)
Video Input Setup (Video (Input))
Make video input related settings in the items of the [Setup] menu > [Video (Input)] menu.
About DVI input signals
• Set the resolution of the DVI signal to be input to one of the following in accordance with the setting of the signal format
of the unit (page II-48). Normal images may not be obtained with other resolutions.
Although signals with resolutions other than 1920 × 1080 may be accepted when DVI input signals are set to digital,
operation is not guaranteed.
• The image size of the DVI input signals will be adjusted to fit the screen of the unit’s signal format while maintaining
its aspect ratio.
Details on [Video (Input)] Menu
Signal Resolution 1080i/59.94,
1080i/50
720p/59.94, 720p/50,
480i/59.94, 576i/50
Analog XGA (60 Hz) 1024 × 768 Yes Yes
WXGA (60 Hz) 1280 × 768 Yes Yes
SXGA (60 Hz) 1280 × 1024 Yes Yes
Digital HDTV (50 Hz) 1920 × 1080 Yes –
HDTV (60 Hz) 1920 × 1080 Yes –
Tip
Menu item Description Knob Parameter Meaning Setting range
SDI1
to
SDI4
Set the SDI signals to input via the SDI IN 1 to 4
connectors.
V3 FS Frame
synchronizer
Off, On
V4 Name Input source
name
IN1 to IN8, CAM1
to 8, VTR1 to 8,
PC1 to 8, SDI1 to
4, DVI, HDMI1 to 3,
VIDEO1 to 3
DVI Set the format and input source name of the signal to
input via the DVI-I IN connector. When you change the
signal format, press the V3 knob to confirm the change.
• For details on the DVI signal to be input, see “About
DVI input signals” (page II-51).
• For details on the formats of DVI-I input video
signals, also see “Configuring the Format of the
Signal Input to the DVI-I Connector” (c Basic
Operation).
V3 Format Format of
DVI-I input
video signal
XGA, SXGA,
WXGA, HDTV50,
HDTV60
V4 Name Input source
name
IN1 to IN8, CAM1
to 8, VTR1 to 8,
PC1 to 8, SDI1 to 4,
DVI, HDMI1 to 3,
VIDEO1 to 3
HDMI1
to
HDMI3
Set the input source names of the HDMI input signals
to be input via the HDMI IN 1 to 3 connectors.
V4 Name Input source
name
IN1 to IN8, CAM1
to 8, VTR1 to 8,
PC1 to 8, SDI1 to 4,
DVI, HDMI1 to 3,
VIDEO1 to 3
VIDEO1
to
VIDEO3
Set the pedestal levels and input source names of the
video input signals to be input via the VIDEO IN 1 to 3
connectors.
When you change a pedestal level, confirm the
modification by pressing the V3 knob.
V3 Setup Pedestal level 0IRE, 7.5IRE
V4 Name Input source
name
IN1 to IN8, CAM1
to 8, VTR1 to 8,
PC1 to 8, SDI1 to 4,
DVI, HDMI1 to 3,
VIDEO1 to 3