Filter
Top Products
II-8
General Transition Settings ([Misc] menu)
Chapter 2 Video Switching
General Transition Settings ([Misc] menu)
You can set the transition rate and the color background (ColBg) with the items in the [Misc] menu.
Press the MISC button in the menu control block to display the [Misc] menu.
Menu item Description Knob Parameter Meaning Setting range
Tra ns ition
Rate (1/2)
You can set the time (transition rate) it takes to switch
videos when a transition is executed with the AUTO
TRANS button, KEY TRANS button, or FTB button for
each transition.
Tips
• The transition rate for effect transition can also be set
under [Effect Transition] in the [Effect] menu.
(See page II-15)
• Key transition rates can be set under [Key Transition] in
the [Key] menu. (See page II-23)
V2 Effect Transition rate for
effect transition
1 to 999
frames (30)
V3 Key Transition rate for
key transition
1 to 999
frames (30)
V4 FTB Transition rate for
FTB
1 to 999
frames (30)
Tra ns ition
Rate (2/2)
V3 Aux1 Transition rate for
Aux1
1 to 999
frames (30)
V4 Aux2 Transition rate for
Aux2
1 to 999
frames (30)
Color
BKGD
A color signal can be generated within the unit and used
as a single-color background. Color signals can be
assigned to the cross point buttons (PGM button and
PST/KEY button) and then used.
V2 Lum Luminance 0.00 to 100.00
V3 Sat Saturation 0.00 to 100.00
V4 Hue Hue 359.99 to 0.00
Port
Enable
Enable or disable the GPI and RS-232C ports which are
used for operation from external devices.
For details on controls for external devices, see “Chapter 7: Controlling
External Devices” (page II-43).
V3 GPI Enables/disables
GPI port
Enbl (enable),
Disbl (disable)
V4 RS232C Enables/disables
RS-232C port (for
future expansion)
Enbl (enable),
Disbl (disable)