Filter
Top Products
II-30
Details on [Key] Menu
Chapter 2 Video Switching
[Key DME Wipe Modify] Menu
Display the [Key DME Wipe Modify] menu by pressing the V1 knob while [Key DME Wipe] (page II-24) is selected.
Aspect Change the aspect ratio of a key wipe
pattern. Setting the aspect ratio to a
negative value stretches the pattern
vertically to make it longer in the vertical
direction, and setting the aspect ratio to a
positive value stretches the pattern
horizontally to make it longer in the
horizontal direction.
V3 Aspect Turns aspect
adjustment on/
off
Off, On II-12
V4 Ratio Adjusts aspect
ratio
–100.00 to +100.00
(0.00)
Multi Turn the multi function for replicating key
wipe patterns on/off.
V4 Multi Turns multi
function on/off
Off, On II-12
Multi
Adjust
The same pattern can be placed up to 63
times either horizontally or vertically, or in
both directions.
V2 H Mult Number of
patterns to
place in
horizontal
direction
1 to 63 II-12
V3 V Mult Number of
patterns to
place in vertical
direction
1 to 63
V4 InvTyp Pattern
placement
method
1 to 4
Menu item Description Knob Parameter Meaning Setting range Reference
page
Menu item Description Knob Parameter Meaning Setting range Reference
page
Positioner Turn the positioner for adjusting the key
DME wipe position on/off.
Tip
The positioner can be used for the
following patterns.
1031, 1201 to 1208, and 1221 to
1224
V4 Pos Turns positioner
on/off
Off, On –
Positioner
Adjust
Adjust the key DME wipe position. If you
want to reset the setting value to “0.00,”
press the V4 knob.
Notes on setting values
Pos H: Negative values adjust the
position to the left, positive values to
the right.
Pos V: Negative values adjust the
position to the bottom, positive
values to the top.
V2 Pos H Adjusts position
in horizontal
direction
–200.00 to
+200.00 (0.00)
–
V3 Pos V Adjusts position
in vertical
direction
–200.00 to
+200.00 (0.00)
V4 Center Resets setting
value to “0”
–
Size Adjusts the size of the sub-screen when
you use the 1201 to 1208 (Frame In/Out)
and 1221 to 1224 (Frame In/Out) key
DME wipe patterns.
Notes on setting values
Param: Set the enlarge/reduce ratio as a
percentage. The 100.00 setting is
equal to the size of the input image.
V3 Size Turns size
adjustment on/
off
Off, On –
V4 Param Adjusts size 0.00 to 200.00
(100.00)