Filter
Top Products
II-57
Message List
Appendix
Information
ID Message Solution
1101 The setting is changed.
Perform "Startup Define", and then
restart.
This appears when you change the system format or 3D mode, or
when the system otherwise needs to be restarted.
Execute [Startup Define], and restart the unit.
1102 Finished. Please restart.
M: xx/B: xx/F: xx/R: xx/Font: xx
FPGA1: xx/2: xx/3: xx/4: xx
M: Main
B: Boot
F: Firmware
R: Register
Font: Font
xx:
•"O": OK
• "E": Error
• "–": Not installed
This appears to display the results after installation of application
software and firmware is complete.
If “E” (error) appears, try installing again. If the problem persists,
contact your local Sony representative.
1103 Import Finished. Please restart. This appears when import of a configuration file is complete. Restart
the unit.