Filter
Top Products
II-48
System Setup (System)
Chapter 8 Setup ([Setup] Menu)
Details on [System] Menu
Menu item Description Knob Parameter Meaning Setting range Confirmation
(press knob)
System
Format
Set the format and aspect ratio to be
used by the unit.
(c Basic Operation: “Configuring the
Signal Format and Aspect Ratio”)
Tip
If you press the V3 or V4 knob, a
message prompting you to restart the
unit appears. Press the V3 knob (OK),
and then turn off the unit and turn it on
again.
V3 Format Signal format 108059,
108050,
720p59,
720p50,
480i59, 576i50,
Test1, Test2,
Test3
Necessary
V4 Aspect Aspect ratio 16:9, 4:3 Necessary
3D Mode When using a 3D system, turn 3D mode
on.
(See “Turning 3D Mode On” (page II-41))
V4 3D Turns 3D mode
on/off
Off, On Necessary
System
Reference
Select the input reference signal.
BB (Black Burst): Black burst signal
Tri (Tri Sync): Tri-level sync for HD
system
INT (Internal): Internal reference signal
of unit (See “Supported input
reference signals” (page II-47))
Tip
If you press the V4 knob, a message
prompting you to restart the unit appears.
Press the V3 knob (OK), and then turn off
the unit and turn it on again.
V4 Ref Input reference
signal
BB, Tri, INT Necessary
REF OUT
Phase
Select the output reference signal phase
using the output video as a reference.
Notes on setting values
–1: One line in advance of output video.
0: Equal phase as output video.
Tip
If you press the V4 knob, a message
prompting you to restart the unit appears.
Press the V3 knob (OK), and then turn off
the unit and turn it on again.
V4 Phase Output reference
signal phase
–1, 0 Necessary
Startup
Mode
Select the setup mode (Startup mode)
used by the unit at startup.
Fact (Factory): Starts with the factory
default settings.
User: Starts using the setup data saved
in [Setup] menu > [Startup Define].
(c Basic Operation: “Saving and
Selecting Settings”)
V4 Def Startup mode Fact, User Necessary
Date Set the date for the unit’s internal clock.
(c Basic Operation: “Configuring the
Date and Time”)
V2 Year Year 2000 to 2099 Necessary
V3 Month Month 1 to 12 Necessary
V4 Day Day 1 to 31 Necessary
Time Set the time for the unit’s internal clock.
(c Basic Operation: “Configuring the
Date and Time”)
V3 Hour Hour 0 to 23 Necessary
V4 Min Minute 0 to 59 Necessary
LCD
Backlight
Adjust the brightness of the backlight of
the menu display.
V4 Bright LCD backlight
brightness
Min (minimum),
1, 2, 3, 4, 5, 6,
Max
(maximum)
Not
necessary