Filter
Top Products
II-17
Details on [Effect] Menu
Chapter 2 Video Switching
Rotation Set the rotation method of a wipe pattern. V4 Rotate Rotation type Off, Angle,
Speed, Mag
(magnitude)
II-11
Rotation
Adjust
Set the parameters depending on the
rotation type selected in [Rotation].
• When [Angle] is selected: Set [Angle].
• When [Speed] is selected: Set [Speed].
• When [Mag] is selected: Set [Angle]
and [Mag].
About setting values
Angle: –100.00 corresponds to the state
in which the pattern is rotated once
counterclockwise, and +100.00 to
the state in which the pattern is
rotated once clockwise. 0.00
corresponds to a non-rotation state.
Mag: –200.00 rotates the pattern twice
counterclockwise, and +200.00
rotates the pattern twice clockwise.
0.00 does not rotate the pattern.
Speed: –100.00 is the speed of one
counterclockwise rotation per
second, and +100.00 is the speed of
one clockwise rotation per second.
0.00 corresponds to a stationary
state.
V2 Angle • Pattern
inclination
angle ([Angle])
• Pattern
inclination
angle when
transition
starts ([Mag])
–100.00 to
+100.00 (0.00)
II-11
V3 Mag Amount of
rotation during
transition
–200.00 to
+200.00 (0.00)
V4 Speed Pattern rotation
speed
–100.00 to
+100.00 (0.00)
Aspect Change the aspect ratio of a wipe
pattern. Setting the aspect ratio to a
negative value stretches the pattern
vertically to make it longer in the vertical
direction, and setting the aspect ratio to a
positive value stretches the pattern
horizontally to make it longer in the
horizontal direction.
V3 Aspect Turns aspect
adjustment on/
off
Off, On II-12
V4 Ratio Adjusts aspect
ratio
–100.00 to
+100.00 (0.00)
Multi Turn the multi function for replicating wipe
patterns on/off.
V4 Multi Turns multi
function on/off
Off, On II-12
Multi
Adjust
The same pattern can be placed up to 63
times either horizontally or vertically, or in
both directions.
V2 H Mult Number of
patterns to place
in horizontal
direction
1 to 63 II-12
V3 V Mult Number of
patterns to place
in vertical
direction
1 to 63
V4 InvTyp Pattern
placement
method
1 to 4
Menu item Description Knob Parameter Meaning Setting range Reference
page