Filter
Top Products
II-50
Audio Setup (Audio)
Chapter 8 Setup ([Setup] Menu)
SDI OUT
AUX1
Assign
Assign the audio signals output from PGM OUT/MIX
OUT/AUX OUT 1/AUX OUT 2 connectors to the
embedded audio output from the AUX 1 connector of
SDI OUT.
For details on the possible combinations for output, see page II-49.
V3 Left Audio signal to
assign
None, AUX1,
AUX2, PGM-L,
MIX-L
V4 Right Audio signal to
assign
None, AUX1,
AUX2, PGM-R,
MIX-R
SDI OUT
AUX2
Assign
Assign the audio signals output from PGM OUT/MIX
OUT/AUX OUT 1/AUX OUT 2 connectors to the
embedded audio output from the AUX 2 connector of
SDI OUT.
For details on the possible combinations for output, see page II-49.
V3 Left Audio signal to
assign
None, AUX1,
AUX2, PGM-L,
MIX-L
V4 Right Audio signal to
assign
None, AUX1,
AUX2, PGM-R,
MIX-R
SDI OUT
MULTI
VIEWER
Assign
Assign the audio signals output from PGM OUT/MIX
OUT/AUX OUT 1/AUX OUT 2 connectors to the
embedded audio output from the MULTI VIEWER
connector of SDI OUT.
For details on the possible combinations for output, see page II-49.
V3 Left Audio signal to
assign
None, AUX1,
AUX2, PGM-L,
MIX-L
V4 Right Audio signal to
assign
None, AUX1,
AUX2, PGM-R,
MIX-R
Audio
Output
Delay 1
Allows you to delay the audio output from the PGM
OUT and MIX OUT connectors on a frame basis. If
the output video is delayed with respect to the audio,
you can delay the audio to synchronize it with the
video.
Note
Adjusting the delay time may result in noise being
generated.
V3 PGM Delay time for
audio output
from PGM OUT
connector
0.00 to 7.50 (1.00)
V4 MIX Delay time for
audio output
from MIX OUT
connector
0.00 to 7.50 (1.00)
Audio
Output
Delay 2
Allows you to delay the audio output from the AUX
OUT 1 and 2 connectors on a frame basis. If the
output video is delayed with respect to the audio, you
can delay the audio to synchronize it with the video.
Note
Adjusting the delay time may result in noise being
generated.
V3 AUX1 Delay time for
audio output
from AUX OUT 1
connector
0.00 to 7.50 (1.00)
V4 AUX2 Delay time for
audio output
from AUX OUT 2
connector
0.00 to 7.50 (1.00)
Output
Level
Adjust the level of audio output to each output
destination.
Tip
The output level of the audio output from the SDI
OUT PGM connector can be adjusted with the
program fader in the audio control block.
V2 MIX Output level from
MIX OUT
connector
–∞ to +10 dB
(0dB)
V3 AUX1 Output level from
AUX OUT 1
connector
–∞ to +10 dB
(0dB)
V4 AUX2 Output level from
AUX OUT 2
connector
–∞ to +10 dB
(0dB)
Oscillator You can make the settings for outputting the
oscillator signal used for adjustment.
Tip
If other than “Off” is selected for [Freq] when the
output destination of the oscillator signal is set in
[Term], the DIM button lights and the output level for
the headphones or monitor is automatically reduced.
V2 Freq Frequency of
oscillator signal
Off, 100 Hz,
440Hz, 1kHz,
10 kHz
V3 Level Output level of
oscillator signal
–∞ to 0 dB
(–20 dB)
V4 Term Terminal of
oscillator signal
None, PGM, MIX,
AUX1, AUX2, All
(all output
destinations)
Menu item Description Knob Parameter Meaning Setting range