Filter
Top Products
1-7 (E)
HDS-X5800
1-6. Installation of Optional Boards
m
The usable optional boards are different depending on the type of signal to handle.
. The HKS-58xxM is the optional board that supports multi-bit rate signal including the HDTV SDI signal.
For the signal system that handles the HDTV SDI signal, use the HKS-58xxM boards for all the optional boards starting
from input to up to output.
. For the signal system that handles the 270 Mbps serial bit stream signal conforming to the DVB-ASI standard, use the
HKS-5830M board for the matrix board. If the HKS-5830SD board is used, an error may occur in the signal.
. To use the HKS-58xxM board, the software in the CPU-339 board in the HDS-X5800 should be upgraded to version 1.20
or higher.
Type of signal Input board Distribution Matrix board Output board Input expansion
board board
HDTV SDI signal HKS-5810M HKS-5820M HKS-5830M HKS-5860M HKS-5811M
SDTV SDI signal HKS-5810SD/5810M HKS-5820M HKS-5830SD/5830M HKS-5860SD/5860M HKS-5811SD/5811M
DVB-ASI signal HKS-5810SD/5810M HKS-5820M HKS-5830M HKS-5860SD/5860M HKS-5811SD/5811M
1-6-2. List of Installation Slots
The HDS-X5800 can be configured to the various configura-
tions in order to support the various systems and to expand
the functions. Select a proper combination of the plug-in
boards and connector boards for these purposes. The
respective boards have the specified slots to which they must
be inserted. Therefore, confirm that the respective boards are
inserted into the specified slots correctly as follows.
For the installation method of the respective boards, refer
to “1-6-3. Installation/Removal of Plug-in Boards” and
“1-6-4. Installation/Removal of Connector Boards”.
n
If any plug-in board or connector board is inserted into
wrong slot, the system error occurs and the HDS-X5800
will not work properly.
Board name
Slots of the front side
Slots of the rear side
CI-29 _ CASCADE IN slot
CNI-11 _ IN 1 slot
CNI-12 _ IN 2 slot
CNI-13 _ IN 1 slot
CNI-14 _ IN 2 slot
CNO-13 _ OUT 1 slot
CNO-14 _ OUT 2 slot
CNO-15 _ OUT 1 slot
CNO-16 _ OUT 2 slot
EQ-91 Connect it to the _
MX-103 board.
EQ-92 Connect it to the _
MX-104 board.
IPM-98 1 IN to 8 IN slot _
MX-103 1 OUT to 8 OUT slot _
MX-104 1 OUT to 8 OUT slot _
1-6. Installation of Optional Boards
1-6-1. Table of Optional Boards
There are the following optional boards for the HDS-X5800.
Option name Board configuration
33 INPUT BOARD SET
HKS-5810M
Connector board : CNI-11 1 pc
Connector board : CNI-12 1 pc
HKS-5810SD
Connector board : CNI-13 1 pc
Connector board : CNI-14 1 pc
34 CASCADE INPUT
BOARD SET
HKS-5811M Plug-in board : EQ-91 1 pc
Connector board : CI-29 2 pcs
HKS-5811SD Plug-in board : EQ-92 1 pc
Connector board : CI-29 2 pcs
33 INPUT DISTRIBUTION
BOARD
HKS-5820M Plug-in board : IPM-98 1 pc
264 x 34 MATRIX BOARD
HKS-5830M Plug-in board : MX-103 1 pc
HKS-5830SD Plug-in board : MX-104 1 pc
34 OUTPUT BOARD SET
HKS-5860M
Connector board : CNO-13 1 pc
Connector board : CNO-14 1 pc
HKS-5860SD
Connector board : CNO-15 1 pc
Connector board : CNO-16 1 pc