Filter
Top Products
1-17 (E)
HDS-X5800
m
The usable optional boards are different depending on the type of signal to handle.
. The HKS-58xxM is the optional board that supports multi-bit rate signal including the HDTV SDI
signal.
For the signal system that handles the HDTV SDI signal, use the HKS-58xxM boards for all the
optional boards starting from input to up to output.
. For the signal system that handles the 270 Mbps serial bit stream signal conforming to the DVB-ASI
standard, use the HKS-5830M board for the matrix board. If the HKS-5830SD board is used, an error
may occur in the signal.
. To use the HKS-58xxM board, the software in the CPU-339 board in the HDS-X5800 should be
upgraded to version 1.20 or higher.
How to read the table
. The letters “a” to “j” are the algebraic number that indicates quantity of the machines. Round up the
numbers under decimal point to integer (whole number).
. The total quantity that is actually required is shown as the number without parenthesis ( ).
The numbers of machines that are shown with parenthesis ( ) are shown for your reference in order to
calculate the required quantity of other models.
Model Quantity Number of matrixes
264
xx
xx
x 272 528
xx
xx
x 272 264
xx
xx
x 544 528
xx
xx
x 544 1024
xx
xx
x 1024
HDS-X5800 a (total quantity) = b x c1224 16
b = (number of inputs) (1) (2) (1) (2) (4)
divided by 264
c = (number of outputs) (1) (1) (2) (2) (4)
divided by 272
HKS-5810M d (total quantity) = e x c 8 16 16 32 128
HKS-5810SD
e = (number of inputs) (8) (16) (8) (16) (32)
Input (connector)
divided by 33
board
HKS-5811M f (total quantity) = _ 8 _ 16 93
HKS-5811SD (b_1) x g
Cascade connection
board
HKS-5820M The same quantity as 8 16 16 32 128
Input (plug-in) board HKS-5810M/5810SD
HKS-5830M h (total quantity) = g x b 8 16 16 32 124
HKS-5830SD
g = (number of outputs) (8) (8) (16) (16) (31)
Matrix board
divided by 34
HKS-5860M The same quantity as 8 16 16 32 124
HKS-5860SD HKS-5830M/5830SD
Output (connector)
board
PFV-SP3300
*
i = j divided by 17 __16 32 61
Signal processing (When HKPF-SP003 is
unit installed in all of the 17
slots)
HKPF-SP003
*
j = (number of inputs) __264 528 1024
Signal distribution
board
* : Because the HKPF-SP003 is capable of six distributions of a signal, it is suited for the HDS-X5800 that requires four distribution at the
maximum.
The HKPF-SP003 is installed in the PFV-SP3300.
1-10. How to Extend Inputs and Outputs