Filter
Top Products
1-24 (E)
HDS-X5800
Status of the entire system
Ref. No. (Address) LED name Status when lights up
D701 (G-8) ACTIVE Control is executed. (The CPU-339 board on which D701 lights up
is mainly running.)
D702 (G-8) REMOTE1 B REMOTE1 B1 or B2 is set to the primary station.
PRIMARY ON
D703 (G-8) RUN The program on the CPU-339 board is running correctly.
D704 (G-8) ERROR An abnormality is detected by the self-diagnostics.
n
Error code is indicated on ND701 to ND703.
ND703 (G-8) ERROR No. 7SEG When an abnormality is detected by the self-diagnostics, its error
ND702 (G-8) code is indicated.
ND701 (G-8) (For details of the error code, refer to Section 2-3.)
Status of the data link that is connected to DATA LAN (DATA connector)
Ref. No. (Address) LED name Status when lights up
D403 (H-8) ACT Sending data to the data link or receiving data from the data link.
D402 (H-8) LINK Being connected to the data link.
D401 (H-8) 100/10 Equipment on the data link is operating on 100BASE-TX.
Status of others
Ref. No. (Address) LED name Status when lights up
D1308 (A-5) +3 V Power supply circuit supplying +3.3 V is operating.
D1307 (B-5) +5 V Power supply circuit supplying +5 V is operating.
D201 (F-7) _ Factory use.
ND302 (J-6) LEFT Factory use.
ND301 (J-6) RIGHT Factory use.
D301 (J-6) M7 Factory use.
D302 (J-6) M6 Factory use.
D303 (J-6) M5 Factory use.
D304 (J-6) M4 Factory use.
1-11. Setting the On-Board Switches and Description of LEDs