Filter
Top Products
119
GB
Troubleshooting
Symptom
Colors are not
reproduced
correctly.
Preview image does
not reflect the print
settings in the
“Graphics” tab of
the “DPP-EX50
Properties” dialog
box.
Print quantity
specified in the
“Paper/Output”
tab of the “DPP-
EX50 Properties”
dialog box does not
take effect.
Check
• Is “Exif Print” checked
in the “Graphics” tab
of the “DPP-EX50
Properties” dialog
box?
•
Is “ICM” selected in
the “Graphics” tab of
the “DPP-EX50
Properties” dialog box?
• Are you using
PictureGear Studio?
Cause/Solutions
c The Exif Print setting in the “Color
reproduction/Picture quality” section
supports the PictureGear Studio only. To
print from other application, uncheck “Exif
Print.”
cThe ICM setting may be valid only when
you are using an ICM-compliant
application. Check to see if the application
software you are using supports ICM.
cThe print settings adjusts the printer itself
and cannot influence the preview image.
cSet the print quantity in the “Print” dialog
box of the PictureGear Studio. The print
quantity setting in the “Paper/Output”
tab of the printer driver does not take
effect.
cDepending on the application you use, the
print quantity setting of the application you
use may have priority over the setting
specified in the printer driver dialog box.