Filter
Top Products
23
GB
Making basic printing
4
Press f/F to set the print
quantity.
• To increase the print quantity one
by one, press f repeatedly.
• To reduce the print quantity one by
one, press F briefly repeatedly.
• To reset the print quantity to zero
immediately, press F for more than
two seconds.
You can set up to 20 copies of print
quantity for an image.
•To display another image, press
g/G.
• To cancel the selection, press
CANCEL.
5
Repeat steps 3 and 4 to select
other images and set print
quantity for each of them.
The selected images are displayed
with the cursor .
To cancel the selection
1 Press g/G/f/F to move the
cursor to the image you want to
cancel in the image list and press
ENTER.
2 Press F repeatedly until the print
quantity becomes “0.”
The image selection is canceled.
6
Press PRINT.
The selected images will be printed.
During printing, the PRINT indicator
flashes and the printing process is
displayed on the LCD screen.
To stop printing
Press CANCEL. When you are
printing multiple copies, the next
printing after the one currently
printing will be canceled.
7
When printing is complete and
the print paper automatically
emerges, remove the printed
paper from the paper tray.
Tip
Even if the remaining volume of the print
cartridge is shorter than the print quantity, you
can proceed with printing. If the print cartridge
runs out in the middle of printing and a
message appears, follow the displayed
instructions to replace the printing cartridge
(page 12).