Filter
Top Products
43
Operation
8 Repeat steps 5, 6 and 7 to enter the remaining characters of the caption.
To enter a space
1 Position the green cursor to the point where you want to enter a space by
performing the operations explained in step 5.
2 Select SP by pressing the ◊, √, ı or ∫ button.
3 Press the EXEC button.
A single space is entered and the green cursor moves to the next position.
If there is a character at the position where the space is entered, that
character is deleted and a single space is left.
To replace a previously entered character without changing the
number of characters
You can replace a previously entered character with a new one.
1 Position the green cursor to the character to be replaced by performing the
operations explained in step 5.
2 Overwrite the invalid character with the correct character by performing the
operations explained in steps 6 and 7.
The previously entered character is replaced with the new one.
To add characters midway
1 Position the cursor to the position
where a character is to be added by
performing the operations explained
in step 5.
Example: To Add a character
between A and B
2 Select INS by pressing the ◊, √, ı
or ∫ button.
1 Move the cursor to B
(B is highlighted green).
3 Press the EXEC button.
A single space is inserted between
A and B and the green cursor is
positioned at the space.
Note
A dark change of the monitor
screen may occur after the EXEC
button is pressed.
4 Enter the character to be added.
2 Switch INS to green
Cursor (lit green)
Continue to next page m
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789
+
–
=
%
CAPT ION ON
ABC
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789
+
–
=
%
CAPT ION ON
ABC